Δέκτης Module Bluetooth BTR100X Ampire

 Τεχνικές προδιαγραφές

AMPIRE Bluetooth® Receiver with Auto-Remote, RCA, aptX

Description
If you want to listen to your music, audio books or navigation from your Apple iPhone or Android smartphone wirelessly via Bluetooth® in maximum sound quality in your car, then the Bluetooth® receivers of the BTR series with aptX(TM) are the solution. You can upgrade to wireless A2DP Bluetooth® audio streaming on most navigation and car stereo systems with Ampire's Bluetooth receivers.

The connection is easily set up and automatically restored via Bluetooth® 5.0. The BTR series uses the Bluetooth® protocol for headphones on your smartphone and does not affect the functionality of your Bluetooth® hands-free car kit.

The BTR100X Bluetooth® receiver is designed for navigation and car stereo systems with RCA input and an on-board power supply of 12 volts.

Bluetooth® listening in CD quality with aptX(TM)?
As an alternative to standard Bluetooth®, we also have receivers with the Bluetooth® aptX(TM) codec. This codec is becoming more and more popular. If you use devices with the aptX(TM) standard, you can significantly improve the sound quality of your Bluetooth® streams.

What does Bluetooth® aptX(TM) improve?
The aptX(TM) codec uses a more efficient method of compressing audio data that makes better use of the available bandwidth. The prerequisite for aptX(TM) streams is that the playback device as well as the transmitter also support Bluetooth aptX(TM). The function can be recognised by the aptX(TM) lettering on the device. The codec supports the common audio formats such as MP3 and FLAC.

Which smartphones support Bluetooth® aptX(TM)?
Not all Android smartphones support the Bluetooth® codec aptX(TM). You can check whether your Android smartphone is compatible in the technical data of your smartphone. An Apple iPhone does not support the Bluetooth® codec aptX(TM).

CONNECTIONS
- Sound output: Cinch (RCA)
- Power supply: +12V ignition (ACC/K15) with fuse 2A
- Remote output: Blue cable +12VDC/20mA

EQUIPMENT:
- splash-proof design, marine certified
- automatic switch on
- automatic remote output
- QDL licensed Bluetooth® 5.0
- A2DP in highest EDR specification
- aptX(TM) audio codec from Qualcomm®.
- BT audio streaming also of lossless files such as Wave, Flac, Lossless, etc.
- Cinch (RCA) connectors with signal output 1.0V
- SSID display name: BTR100X
- 10m range

SMARTPHONE COMPATIBILITY
- Android (Bluetooth® and Bluetooth® aptX(TM))
- Apple iOS (Bluetooth®)

OPTIONAL ACCESSORIES
55100-CINCH AMPIRE interference suppression filter

TECHNICAL DATA:
- Voltage: +12V DC
- Current consumption including remote output: <65mA
- Voltage/current remote output: +12V DC, max.20mA
- Bluetooth® 5.0
- aptX(TM) audio codec by Qualcomm®.
- Frequency range: 20Hz-20kHz
- Encoding: Low Complexity Subband Codec (SBC)
- Bit rate: up to 384 kbps (48 kHz sampling)
- Audio output voltage: 1V RMS
- Bluetooth 4.0 / Transmit power <10mW EIRP and aptX
- Housing dimensions: Height: 20mm, Width: 65mm, Length: 50mm
- Blue: Remote output +12V/20mA (0.459mm² or 26x 0.15mm), 305mm length
- Red: +12V ignition (ACC) fuse 2A (0.459mm² resp. 26x 0.15mm), 305mm length
- Black: Ground (0,459mm² resp. 26x 0.15mm), 305mm length
- Cinch plug: red= right, white= left

BLUETOOTH® APPROVAL:
- Declaration ID D068331
- Referenced Qualified Design ID 173056
- Listing Date 2024-04-18

PAIR A DEVICE:
- make sure Bluetooth® is switched on in your device
- switch on the ignition
- the LED (6) flashes blue (pairing mode)
- select "BTR100X" in the Bluetooth® menu of your device to connect
- After successful connection, the LED lights up continuously and a single beep sounds over the audio system.